Samsung's Galaxy S III has been around for a long time, but for the fruit powder, except for the next-generation iPhone, it seems that the phones launched at this stage can't bring any interest to them. And the photos, music, information, etc. accumulated in the iPhone are another important reason why fruit powders are unwilling to turn their backs. If there is a synchronization kit that can synchronize between iPhone and Android, maybe the situation is different.
In order to encourage more iPhone users to switch to the Galaxy S III camp, Samsung recently launched a new synchronization kit with the developer Media Mushroom, which can quickly and easily implement other smart phones and Samsung Galaxy series smart on Mac and PC. The synchronization of the phone.
What does this mean? Fruit powders don't have to worry about the large amount of photos, videos, podcasts, music, contacts and information on the iPhone that can't be easily transferred to the Galaxy S III. With this sync kit, you can quickly transfer information from the iPhone to the Galaxy S III. And this sync kit also supports the synchronization of the Galaxy S III with iTunes, giving you enough reason to abandon the iPhone.
This is another important way for Samsung to dig corners of fruit powder. If you are ready, try this free sync kit.
Coaxial Power D-Sub Solder Cup
Coaxial Power D-Sub Solder Cup Contacts with Mixed or Full Layout
Transmit Radio Frequency Signals
The Coaxial D-Sub have like the Power D-Subr replaced the two rows in a Standard Density connector with a coaxial contact that take up about the same size as the two rows of signal contacts. The Coaxial D-Sub is exactly the same size as the Standard Density connector but instead of example 9 positions of signal pins it has 2 power contacts , or instead of 37 positions of signals it has 8 coaxial contacts.
The Impedance for the coaxial contacts are 50Ω or 75Ω
The Coaxial D-Sub with Mixed Layout mixes both coaxial contacts and signal contacts in the same connector. For example the same size as a 15 position Standard Density D-Sub you can have what we call a 7W2, which means there is 7 contacts where 2 of them are coaxial contacts, which means there are 5 signal contacts, so 5 signals and 2 coaxial. See the Layout in the Tech Specs on the bottom, there are a lot of combinations of the Mixed Layout alternative.
Antenk's Coaxial D-Sub connectors are available in 5 standard shell sizes with 23 multiple contact arrangements. These reliable, robust combination d-sub connectors allow a combination of signal and coaxial contacts in cable mount, vertical board mount & right angle board mount termination type variations.
Features
Coaxial d-sub for a variety of applications in cable mount.
Signal contacts come pre-loaded. Coaxial contacts supplied - Not Pre-Loaded.
Available in 5 standard shell sizes with 23 multiple contact arrangements: 1W1/ 2V2 /2W2 /3V3/ 3W3/ 5W1/ 5W5
/ 7W2/ 8W8/ 9W4/ 11W1/ 13W3/ 13W6 /17W2/ 17W5 /21W1/ 21W4/ 24W7/ 25W3 /27W2/ 36W4/ 43W2/ 47W1
Allows combination of signal and coaxial d-sub contacts.Materials
Shell: Steel, nickel plated
Insulator: PBT + 30% fiber-glass - Black, U.L. rated 94V-O
Contacts: Brass - Gold flash over nickel
Notes
Panel Cut-Outs
5W1 = Standard 9 Pin Shell
3W3 / 3W3K / 7W2 / 11W1 = Standard 15 Pin Shell
5W5 / 9W4 / 13W3 / 17W2 / 21W1= Standard 25 Pin Shell
8W8 / 21WA4 = Standard 37 Pin Shell
Other Contact Arrangements Available Upon Request.
Coaxial D-Sub Connector, Coaxial D-Sub with Mixed Layout, Coaxial D-Sub with Mixed with Full Layout,Coaxial D-Sub Male, Coaxial D-Sub Female
ShenZhen Antenk Electronics Co,Ltd , https://www.antenkwire.com