E27 Ceramic 5W LED Light/Bulb Replace 60W Traditional Bulb

Main Features
1. LED: 5730 SMD LED.
2. Input Voltage: 85-265VAC, Wide voltage design, available for whole world use.
3. Technique: The LED closely connected to the crust ensures life-span effectively.
4. Driver: Built-in power supply, precision constant current drive LED, and further improve the light stability.
5. Golden, Silver Aluminum finished cover are both available
6. Beam Angle(degree): 360degree; Base Type: E27 B22
8. Warranty: 2years

Typical Applications
Replacement bulbs for general lighting, especially for museums, art galleries, cosmetic counters, where UV or IR
Radiation is undesirable.

Causion:
Don't install it around a humid environment or place which has water drops.
Don't drop, scratch or squeeze the bulb.
Don't take apart the product or replace mechanical and electronic components.
Care needs to be taken that the light fixture with the bulb is a safe distance from paper, fabric or other
Inflammables.
Tighten the bulb base into socket in case to prevent falling out.
Don't touch the bulb body with fingers after it works for some time as the body temperature is quite warm.
Do not stare at the strong light for a long time as it may cause injury to eyes.

Installation

1. Switch off the power before replacing the lamp
2. Keep away from direct sunshine and high temperature
3. Indoor use only
4. If any doubt about the installation or use of this product, consult a competent electrician
5. Using environment: -20-50d
Main Features
1. LED: 5730 SMD LED.
2. Input Voltage: 85-265VAC, Wide voltage design, available for whole world use.
3. Technique: The LED closely connected to the crust ensures life-span effectively.
4. Driver: Built-in power supply, precision constant current drive LED, and further improve the light stability.
5. Golden, Silver Aluminum finished cover are both available
6. Beam Angle(degree): 360degree; Base Type: E27 B22
8. Warranty: 2years

Typical Applications
Replacement bulbs for general lighting, especially for museums, art galleries, cosmetic counters, where UV or IR
Radiation is undesirable.

Causion:
Don't install it around a humid environment or place which has water drops.
Don't drop, scratch or squeeze the bulb.
Don't take apart the product or replace mechanical and electronic components.
Care needs to be taken that the light fixture with the bulb is a safe distance from paper, fabric or other
Inflammables.
Tighten the bulb base into socket in case to prevent falling out.
Don't touch the bulb body with fingers after it works for some time as the body temperature is quite warm.
Do not stare at the strong light for a long time as it may cause injury to eyes.

Installation

1. Switch off the power before replacing the lamp
2. Keep away from direct sunshine and high temperature
3. Indoor use only
4. If any doubt about the installation or use of this product, consult a competent electrician
5. Using environment: -20-50d

14.8V Li-ion Battery Pack

Langrui Energy (Shenzhen) Co.,Ltd , https://www.langruienergy.com