Megatro 138kv Angle Tension Power Steel Pole (MGP-AT138)

Megatro 138KV angle tension power steel pole
this photo refer to our double circuit transmission pole, it is also tension angel pole. Tension tower was located between every three or four suspension tower to pull the conductors which are re-tied in tension tower insulators. And Where in the power transmission and distribution line, it must change direction, then angle pole are used. Structures are classified as angle suspension, angle strain, and angle dead-end. In angle degree, they are classified as light angle, medium angle and heavy angle.


And this 138KV angle tension steel pole was made of hollow pipe, which can be quickly deployed with minimal hardware and labor, factory drilled to customer specifications or modified in the field, if required, using a carbide-tip bit. In general, this type of pole fabricated with mild steel or high strength steel, such as ASTM A36, ASTM A572 GR50, GR65, Q235B, Q345B, S355JO, S355JR, ST37, ST52, BS 50B or other. This type of pole often used in city power transmission grid, with little space, economic and lower cost. Now MEGATRO can produce distribution pole with some type as follow:

(1) Flange connection
(2) Slip joint
(3) Step type
(4) Stagger type
(5) Others

MEGATRO can optimize design, to set a compact, narrow base, the pole design not only advanced but practical, with an emphasis on economic rationality to ensure safe and reliable operation. MEGATRO has a complete staff of professional engineering personnel trained in the PLS Pole program and three different manufacturing processes for producing steel towers, poles and other supports. We utilize the latest versions of PLS-CADD, PLS-POLE, TOWER, AutoCAD and other CAD software. To meet the expectation, we produce shop drawings, components list and full production documentation, and even complete 3D models that facilitate the elimination of all design and drawings errors generated on the drawings. Another advantage is our 3D design and loading & design report, and can optimized the design and save cost for our clients.

MEGATRO is one of the few manufactures who assemble a face of 138KV angle tension power steel pole. This attention to quality may not be the cheapest process but it does insure every tower meets our high standards of quality. And it helps to reduce on-site construction cost due to mismatched assemblies. MEGATRO 138KV angle tension power steel pole systems can accommodate a variety of cross-arm and other accessories. After fabrication 138KV angle tension power steel pole are delivered to the galvanizing facility to be Hot DIP Galvanized. Towers are processed through the facility by Caustic Cleaning, Pickling, and then Fluxing. These strict procedures insure years of maintenance free towers. Even we take secondary finish for client again, which as duplex surface treatment.

Other information:
Availability size: Based on the customer's requirements.
Material: Chinese material or as per clients requirement
Package: Both parties discuss before delivery
Port of Loading: Qingdao Port
Lead Time: One month or based on the customer's needs
Fabrication standard: Chinese Standard or other standard which client accepted

Steel grades
POLE SHAFT: Chinese steel Q345B, which same to ASTM A572 GR50
Other webs, bracing and not stress plate and angle steel: Chinese Q235B, which same to ASTM A36
Plates: Chinese steel Q345B, which same to ASTM A572 GR50
Bolts: Chinese grade 6.8 and 8.8, which similar to ASTM A394
A) Dimension and tolerance for angle are according to GB/T1591-1994, similar to EN 10056-1/2
B) Hot DIP galvanization in accordance with GB/T 13912-2002, which similar to ASTM A 123
C) The welding will be performance in accordance with AWS D1.1 or CWB standard

If any special requirement, we can design and discuss with client. Megatro 138KV angle tension power steel pole
this photo refer to our double circuit transmission pole, it is also tension angel pole. Tension tower was located between every three or four suspension tower to pull the conductors which are re-tied in tension tower insulators. And Where in the power transmission and distribution line, it must change direction, then angle pole are used. Structures are classified as angle suspension, angle strain, and angle dead-end. In angle degree, they are classified as light angle, medium angle and heavy angle.


And this 138KV angle tension steel pole was made of hollow pipe, which can be quickly deployed with minimal hardware and labor, factory drilled to customer specifications or modified in the field, if required, using a carbide-tip bit. In general, this type of pole fabricated with mild steel or high strength steel, such as ASTM A36, ASTM A572 GR50, GR65, Q235B, Q345B, S355JO, S355JR, ST37, ST52, BS 50B or other. This type of pole often used in city power transmission grid, with little space, economic and lower cost. Now MEGATRO can produce distribution pole with some type as follow:

(1) Flange connection
(2) Slip joint
(3) Step type
(4) Stagger type
(5) Others

MEGATRO can optimize design, to set a compact, narrow base, the pole design not only advanced but practical, with an emphasis on economic rationality to ensure safe and reliable operation. MEGATRO has a complete staff of professional engineering personnel trained in the PLS Pole program and three different manufacturing processes for producing steel towers, poles and other supports. We utilize the latest versions of PLS-CADD, PLS-POLE, TOWER, AutoCAD and other CAD software. To meet the expectation, we produce shop drawings, components list and full production documentation, and even complete 3D models that facilitate the elimination of all design and drawings errors generated on the drawings. Another advantage is our 3D design and loading & design report, and can optimized the design and save cost for our clients.

MEGATRO is one of the few manufactures who assemble a face of 138KV angle tension power steel pole. This attention to quality may not be the cheapest process but it does insure every tower meets our high standards of quality. And it helps to reduce on-site construction cost due to mismatched assemblies. MEGATRO 138KV angle tension power steel pole systems can accommodate a variety of cross-arm and other accessories. After fabrication 138KV angle tension power steel pole are delivered to the galvanizing facility to be Hot DIP Galvanized. Towers are processed through the facility by Caustic Cleaning, Pickling, and then Fluxing. These strict procedures insure years of maintenance free towers. Even we take secondary finish for client again, which as duplex surface treatment.

Other information:
Availability size: Based on the customer's requirements.
Material: Chinese material or as per clients requirement
Package: Both parties discuss before delivery
Port of Loading: Qingdao Port
Lead Time: One month or based on the customer's needs
Fabrication standard: Chinese Standard or other standard which client accepted

Steel grades
POLE SHAFT: Chinese steel Q345B, which same to ASTM A572 GR50
Other webs, bracing and not stress plate and angle steel: Chinese Q235B, which same to ASTM A36
Plates: Chinese steel Q345B, which same to ASTM A572 GR50
Bolts: Chinese grade 6.8 and 8.8, which similar to ASTM A394
A) Dimension and tolerance for angle are according to GB/T1591-1994, similar to EN 10056-1/2
B) Hot DIP galvanization in accordance with GB/T 13912-2002, which similar to ASTM A 123
C) The welding will be performance in accordance with AWS D1.1 or CWB standard

If any special requirement, we can design and discuss with client.

Iphone 8 Plus Tempered Glass:

IPhone 8 Plus Tempered Glass is especially designed to fit the iPhone 8 plus screen perfectly. It can protect your iPhone 8 Plus screen from drops, bumps, scratches and scrapes, and protect your iPhone effectively against any scratches on the screen. Screen Guard provides super smooth touching as well as no lose in touch screen sensitivity, also with maximum protection. 2.5D or 3D rounded edge can touch smooth and will not hurt you when using your phone.

Description of iPhone 8 Plus Tempered Glass

Size: 5.5 inch

For iPhone 8 Plus

Material: Corning, Schott or AGC

Radian: 2.5D / 3D

Technology: Clear / Anti glare / Anti blue light / Privacy / Printing

MOQ: 1K pieces

Packaging: Standard export package or Customized

Payment: T/T, L/C, Others

Delivery: In Shenzhen CHINA, 2.5D: 7-10 working days / 3D: 15-20 working days after your payment

FAQ:

Q1: Are you a trading company or manufacturer?

---A: We are distributor located in Shenzhen, China.

Q2: Is the sample free?

---A: Yes, the free sample will be sent for your evaluation!

Q3: What is the production lead time?

---A: 2.5D: 7-10 working days / 3D: 15-20 working days after your payment.

Q4: Do you inspect all your goods before delivery?

---A: Yes, we have 100% inspect before delivery.

Welcome to make inquiry !

IPhone 8 Plus Tempered Glass

Iphone 8 Plus Tempered Glass,Anti Blue Light Tempered Glass,White Iphone 8 Plus Tempered Glass,Hd Tempered Glass For Iphone 8 Plus

Shenzhen Kantou IM Technology Co., Ltd. , http://www.kantou-im.com