Brick wall mixer description - Huaqiang Electronic Network

Single chip microcomputer STM32L151CCU6

Wall-mounted brick mixer wall bricks compressive strength sample preparation mixing equipment, wall-wall brick sample test mixer is Luda instrument follows GBT 25044-2010 "General requirements for wall-mounted brick compressive strength sample preparation equipment" technical design patent design The latest type of strength test mixing equipment produced. It is a special equipment for mixing pulp. The control system adopts program-controlled frequency conversion technology, which has the advantages of continuous adjustable speed, digital display, beautiful appearance and convenient operation.

 Wall-mounted brick compressive strength sample mixing equipment working principle: the relative motion between the mixing arm and the stirring pot is used to test the compressive strength of the masonry brick. 
 Matters needing attention: 1. Read the instructions carefully before use, strictly in accordance with the operating procedures. 2. The grounding wire device must be connected before starting the machine. It should not be removed at will during operation to avoid electric shock. 3. When the machine is working, the hand is not allowed to reach into the mixing pot to avoid accidents. 4. If the machine is found to be faulty, stop it immediately and look for a professional. 5. After the mixing is completed, the drum and the stirring blade are removed, washed, and stored dry. 6. Mix the pot and disassemble it. It must be handled gently when it is installed, so as to avoid the deformation of the bumper.