Lanzhou Power Plant 2×350MW Special Extinguishing General Contract Tender Announcement for “Shangmao Small Press†Off-site Expansion Project
The tendering project Guodian Lanzhou Thermal Power Co., Ltd. 2×350MW “Shangda Big Down Small†project special firefighting general contracting for the extension project has been approved. The bidder is Guodian Longyuan Power Technology Engineering Co., Ltd. The construction fund is self-raised and the project is ready The bidding conditions are now open tendered for the general contracting of the project.
1.3 Project Overview and Bidding Scope
Construction Location: Jinya Town, Yuzhong County, Lanzhou City, Gansu Province
Construction Scale: 2×350MW supercritical direct air-cooled heating units, simultaneous construction of desulfurization, SCR denitrification facilities.
Planned construction period: 15 days after the signing of the contract, the design declaration work will be completed, and the installation will be completed within 80 days. It will be responsible for acceptance by local fire control authorities 15 days before the start-up of the entire power plant.
The site is located on the wasteland of Doujiaying about 20km east of Lanzhou City. The north side of the site is adjacent to the Longhai Railway, the south side is adjacent to the Lancang Railway, the north is about 500m from the Wanchuan River, and the east side is adjacent to the Doujiagou.
The bidding scope of this standard is a complete set of complete special fire engineering contract for 2×350MW coal-fired units, including: (1) Automatic water-spraying fire-fighting system. (2) IG541 gas fire extinguishing equipment system. (3) Low pressure carbon dioxide gas fire extinguishing system. (4) Fire probe automatic fire extinguishing system. (5) Electrically controlled water cannon fire extinguishing systems. (6) The whole plant fire detection and alarm system. Including but not limited to the scope of design, procurement, transportation and storage, construction, commissioning, firefighting departments filing for review, report construction, inspection, third party inspection, fire department inspection, inspection, completion, commissioning, deficiencies, until Handle relevant procedures for special firefighting systems through firefighting acceptance and obtain relevant certification documents, technical and after-sales services, personnel training etc. issued by the fire control department, as well as all necessary materials, spare parts, special tools, consumables, and related technical data. Wait.
1. 4 bidder qualification requirements
The requirements in the following table must be met (if the requirements in the other parts of the bidding documents do not match, this article shall prevail).
No.
Subpackage name
Bidder’s financial, qualification and performance requirements
1
Special fire engineering general contracting
1. The bidder must be an independent legal entity.
2. The Bidder shall have Class A qualification for fire protection facilities engineering design and Class A qualification for professional contracting of fire protection facilities engineering.
3. The bidder has at least two 300MW unit capacity and above, and has successfully and reliably operated for more than 2 years (automatic water spray or fire alarm or gas fire protection system project) supply, installation and commissioning performance, and passed through the local fire department Acceptance, and provide a copy of the contract, user certification and copy of the acceptance certificate of the fire department.
4, bidders must have a safety production license.
5, bidders must have a sound quality management system, environmental management system and occupational health and safety management system and provide an effective certification.
6. The bidder must substantially respond to the terms of the contract specified in the bidding documents and the completion period.
7, bidders must have good financial resources, bank credit and business reputation, not being ordered to suspend business, property is taken over, frozen, bankruptcy.
8. The bidder must have terminated the contract in the past five years without having breached the contract or been subcontracted by any of the contracts.
9. The bidder has no significant project quality and safety accidents in the project that are similar to the project to be tendered during the past three years.
10. When the bidder is a consortium: (1) A consortium bid is used. Each party to the consortium shall have an independent legal personality and its members must have corresponding qualifications. (2) The two sides of the consortium must sign a consortium agreement with legal effect. The consortium should appoint consortium-headed entities, have a clear division of labor, and have mutual and joint liability. This agreement is part of the bidding documents and is submitted with the bidding documents.
11. The bidder did not appear to have been listed as an untrustworthy executor during the evaluation of the project. It was specifically determined that the list of information on the list of untrustworthy executors in the national court was published and searched (shixin.court.gov.cn) and the National Development and Reform Commission Credit China () website search results prevail.
12. This tender accepts consortium bids.
1.5 Potential bidders wishing to purchase tender documents should first be members.
1.6 Selling Bidding Documents:
The tender documents are purchased using the online payment model (wireless transfer, online banking transfer, on-site cash payment and other purchase methods are not accepted). The system also supports corporate online banking payment and personal online banking payment.
1.6.1 If purchased through a company account, company accounts must have online banking capabilities. When online payment is made, this website will be redirected (linked) to the bank website selected by the purchaser.
1.6.2 If purchased through a personal account, it will be considered that the purchaser has obtained authorization from the company and is equivalent to a company purchase. Before you purchase, verify that the online payment limit of your bank card is not less than the selling price of the bidding documents, so as not to affect the purchase of the bidding documents.
1.6.3 The bidder must be the bidder. The basic information such as bidder's name, correspondence address, contact person, and contact information that the potential bidder fills in on the platform must be accurate, and the information on the whole process of tendering and bidding should be issued and contacted.
1.6.4 After successful payment, bidders directly download the electronic version of the bidding documents from the Internet. The tenderer/bidding agency does not provide any paper tender documents. Successful payment means that the tender documents have been sold. Except for the reasons of the tenderer or the bidding agency, the tender documents will not be refunded once sold.
1.6.5 The bidding agency will mail the commercial invoice for the bidding documents to potential bidders as soon as possible according to the mailing address filled in when purchasing the bidding documents.
1.6.6 If the bidding document fails to be purchased or other problems, please contact customer service center.
1.7 Selling Bidding Documents: Selling tender documents from 09:00 on September 28, 2016 to 16:00 on October 12, 2016.
1.8 Price of Bidding Documents and Bid Security
No.
project name
Quantity
Bidding documents price (yuan)
Duration
Tender number
Bid security (yuan)
1
Special fire engineering general contracting
1500 yuan
See tender documents
GDCX01-EPCZB16-0014/01
150000 yuan
1.9 deadline for submitting tender documents: October 25, 2016, 11:00 (Beijing time), overdue or non-conforming tender documents will not be accepted.
Contact: Qian Yong
Mobile:
phone
fax
E-mail:
In order to ensure that you can bid smoothly, please consult the bidding agency or the tenderer for detailed requirements for bidding before bidding or purchasing the bidding documents. The specific requirements and project conditions shall be interpreted by the bidding agency or the tenderee.
The tendering project Guodian Lanzhou Thermal Power Co., Ltd. 2×350MW “Shangda Big Down Small†project special firefighting general contracting for the extension project has been approved. The bidder is Guodian Longyuan Power Technology Engineering Co., Ltd. The construction fund is self-raised and the project is ready The bidding conditions are now open tendered for the general contracting of the project.
1.3 Project Overview and Bidding Scope
Construction Location: Jinya Town, Yuzhong County, Lanzhou City, Gansu Province
Construction Scale: 2×350MW supercritical direct air-cooled heating units, simultaneous construction of desulfurization, SCR denitrification facilities.
Planned construction period: 15 days after the signing of the contract, the design declaration work will be completed, and the installation will be completed within 80 days. It will be responsible for acceptance by local fire control authorities 15 days before the start-up of the entire power plant.
The site is located on the wasteland of Doujiaying about 20km east of Lanzhou City. The north side of the site is adjacent to the Longhai Railway, the south side is adjacent to the Lancang Railway, the north is about 500m from the Wanchuan River, and the east side is adjacent to the Doujiagou.
The bidding scope of this standard is a complete set of complete special fire engineering contract for 2×350MW coal-fired units, including: (1) Automatic water-spraying fire-fighting system. (2) IG541 gas fire extinguishing equipment system. (3) Low pressure carbon dioxide gas fire extinguishing system. (4) Fire probe automatic fire extinguishing system. (5) Electrically controlled water cannon fire extinguishing systems. (6) The whole plant fire detection and alarm system. Including but not limited to the scope of design, procurement, transportation and storage, construction, commissioning, firefighting departments filing for review, report construction, inspection, third party inspection, fire department inspection, inspection, completion, commissioning, deficiencies, until Handle relevant procedures for special firefighting systems through firefighting acceptance and obtain relevant certification documents, technical and after-sales services, personnel training etc. issued by the fire control department, as well as all necessary materials, spare parts, special tools, consumables, and related technical data. Wait.
1. 4 bidder qualification requirements
The requirements in the following table must be met (if the requirements in the other parts of the bidding documents do not match, this article shall prevail).
No.
Subpackage name
Bidder’s financial, qualification and performance requirements
1
Special fire engineering general contracting
1. The bidder must be an independent legal entity.
2. The Bidder shall have Class A qualification for fire protection facilities engineering design and Class A qualification for professional contracting of fire protection facilities engineering.
3. The bidder has at least two 300MW unit capacity and above, and has successfully and reliably operated for more than 2 years (automatic water spray or fire alarm or gas fire protection system project) supply, installation and commissioning performance, and passed through the local fire department Acceptance, and provide a copy of the contract, user certification and copy of the acceptance certificate of the fire department.
4, bidders must have a safety production license.
5, bidders must have a sound quality management system, environmental management system and occupational health and safety management system and provide an effective certification.
6. The bidder must substantially respond to the terms of the contract specified in the bidding documents and the completion period.
7, bidders must have good financial resources, bank credit and business reputation, not being ordered to suspend business, property is taken over, frozen, bankruptcy.
8. The bidder must have terminated the contract in the past five years without having breached the contract or been subcontracted by any of the contracts.
9. The bidder has no significant project quality and safety accidents in the project that are similar to the project to be tendered during the past three years.
10. When the bidder is a consortium: (1) A consortium bid is used. Each party to the consortium should have an independent legal personality, and its members must have corresponding qualifications. (2) The two sides of the consortium must sign a consortium agreement with legal validity. The consortium should appoint consortium-headed units, have a clear division of labor, and have mutual and joint liability. This agreement is part of the bidding documents and is submitted with the bidding documents.
11. The bidder did not appear to have been listed as an untrustworthy executor during the evaluation of the project. It was specifically determined that the list of information on the list of untrustworthy executors in the national court was published and searched (shixin.court.gov.cn) and the National Development and Reform Commission Credit China () website search results prevail.
12. This tender accepts consortium bids.
1.5 Potential bidders wishing to purchase tender documents should first be members.
1.6 Selling Bidding Documents:
The tender documents are purchased using the online payment model (wireless transfer, online banking transfer, on-site cash payment and other purchase methods are not accepted). The system also supports corporate online banking payment and personal online banking payment.
1.6.1 If purchased through a company account, company accounts must have online banking capabilities. When online payment is made, this website will be redirected (linked) to the bank website selected by the purchaser.
1.6.2 If purchased through a personal account, it will be considered that the purchaser has obtained authorization from the company and is equivalent to a company purchase. Before you purchase, verify that the online payment limit of your bank card is not less than the selling price of the bidding documents, so as not to affect the purchase of the bidding documents.
1.6.3 The bidder must be the bidder. The basic information such as bidder's name, correspondence address, contact person, and contact information that the potential bidder fills in on the platform must be accurate, and the information on the whole process of tendering and bidding should be issued and contacted.
1.6.4 After successful payment, bidders directly download the electronic version of the bidding documents from the Internet. The tenderer/bidding agency does not provide any paper tender documents. Successful payment means that the tender documents have been sold. Except for the reasons of the tenderer or the bidding agency, the tender documents will not be refunded once sold.
1.6.5 The bidding agency will mail the commercial invoice for the bidding documents to potential bidders as soon as possible according to the mailing address filled in when purchasing the bidding documents.
1.6.6 If the bidding document fails to be purchased or other problems, please contact customer service center.
1.7 Selling Bidding Documents: Selling tender documents from 09:00 on September 28, 2016 to 16:00 on October 12, 2016.
1.8 Price of Bidding Documents and Bid Security
No.
project name
Quantity
Bidding documents price (yuan)
Duration
Tender number
Bid security (yuan)
1
Special fire engineering general contracting
1500 yuan
See tender documents
GDCX01-EPCZB16-0014/01
150000 yuan
1.9 deadline for submitting tender documents: October 25, 2016, 11:00 (Beijing time), overdue or non-conforming tender documents will not be accepted.