With the introduction of LED into the indoor and outdoor lighting market, LED lighting prices have also dropped significantly, but the uneven quality has also caused problems. According to reports, LED lighting specifications have been successively established throughout the country, and various mandatory lighting standards will start in 2012. On the road, it will be expected to speed up the vicious competition for the elimination of inferior products, which in turn will drive the reshuffle effect of the LED lighting market.
Due to the increasing popularity and diversification of LED lighting applications, Taiwan’s “Ministry of Economic Affairs†Bureau of Standards has successively formulated a number of LED lighting standards in recent years. Following the announcement of LED street lamp specifications, the world’s leaders announced that at the end of 2010, three common LED indoor lamp standards were issued, including LEDT8 straight tube lamp, LED flood light and light steel frame light (including flat light), etc., the industry pointed out that, despite the relevant standards and regulations have been set, but after many years of promotion of LED lights, it is expected to expand the installation until 2012, due to the government The slow introduction and the preparation of the budget estimate that it is estimated that it will not be possible until 2013-2014 to release the purchase quotation.
Although the development of the LED industry is in full swing, due to the large differences in climate and environment between regions, industrial standards have not yet entered the national standard project. Each province is responsible for promoting the establishment of regional LED lighting standards. However, it is pointed out that the National Development and Reform Commission will adopt LED lighting technology in the near future. Standardization, with indoor LED downlights as a priority project, it is expected that after the technical specifications are finalized, in 2012, under the promotion of the 12th Five-Year Plan of the mainland, the central government announced the subsidy financial plan for LED indoor lighting will be expected to expand.
As for the import of LED lighting products into the EU must pass CE certification, and consider electromagnetic radiation may cause harm to the human body, the EU also announced that in 2013, the implementation of human body electromagnetic radiation safety standards.
As the US Environmental Protection Agency announced new specifications for solid state lighting fixtures and light source products in October 2011, the industry pointed out that the recent luminosity test of the LM-80, which has received much attention, is expected to be implemented from April 2012 onwards. After standardizing the road, future North American market lighting manufacturers will preferentially purchase LED products that have passed LM-80 certification. For unverified Taiwanese LED packaging and die factories, the future entry into the US market may be hindered.
Because the LM-80's light decay verification requires 6,000 hours of testing, which takes up to 6 to 8 months, some LED industry believes that LED product specifications and technologies are changing with each passing day. After several months, LED lighting verification standards It may change again, so it still holds doubts about this certification, but Taiwan’s ITRI said that the LM-80 is regarded as a ticket to enter the US market, and the manufacturer must issue a report on the trial of LM-80 (LED lumen maintenance). A certificate can be used to obtain the ENERGY STAR mark. At present, the IES has established the LM-80 light attenuation detection standard, which not only provides measurement standards for LED applications, but also provides quality assurance for consumers. Become a universal testing standard.
Due to the increasing popularity and diversification of LED lighting applications, Taiwan’s “Ministry of Economic Affairs†Bureau of Standards has successively formulated a number of LED lighting standards in recent years. Following the announcement of LED street lamp specifications, the world’s leaders announced that at the end of 2010, three common LED indoor lamp standards were issued, including LEDT8 straight tube lamp, LED flood light and light steel frame light (including flat light), etc., the industry pointed out that, despite the relevant standards and regulations have been set, but after many years of promotion of LED lights, it is expected to expand the installation until 2012, due to the government The slow introduction and the preparation of the budget estimate that it is estimated that it will not be possible until 2013-2014 to release the purchase quotation.
Although the development of the LED industry is in full swing, due to the large differences in climate and environment between regions, industrial standards have not yet entered the national standard project. Each province is responsible for promoting the establishment of regional LED lighting standards. However, it is pointed out that the National Development and Reform Commission will adopt LED lighting technology in the near future. Standardization, with indoor LED downlights as a priority project, it is expected that after the technical specifications are finalized, in 2012, under the promotion of the 12th Five-Year Plan of the mainland, the central government announced the subsidy financial plan for LED indoor lighting will be expected to expand.
As for the import of LED lighting products into the EU must pass CE certification, and consider electromagnetic radiation may cause harm to the human body, the EU also announced that in 2013, the implementation of human body electromagnetic radiation safety standards.
As the US Environmental Protection Agency announced new specifications for solid state lighting fixtures and light source products in October 2011, the industry pointed out that the recent luminosity test of the LM-80, which has received much attention, is expected to be implemented from April 2012 onwards. After standardizing the road, future North American market lighting manufacturers will preferentially purchase LED products that have passed LM-80 certification. For unverified Taiwanese LED packaging and die factories, the future entry into the US market may be hindered.
Because the LM-80's light decay verification requires 6,000 hours of testing, which takes up to 6 to 8 months, some LED industry believes that LED product specifications and technologies are changing with each passing day. After several months, LED lighting verification standards It may change again, so it still holds doubts about this certification, but Taiwan’s ITRI said that the LM-80 is regarded as a ticket to enter the US market, and the manufacturer must issue a report on the trial of LM-80 (LED lumen maintenance). A certificate can be used to obtain the ENERGY STAR mark. At present, the IES has established the LM-80 light attenuation detection standard, which not only provides measurement standards for LED applications, but also provides quality assurance for consumers. Become a universal testing standard.
Pv Connector,Mc4 Connector,Solar Panel Connectors,Solar Connector
Sowell Electric CO., LTD. , https://www.sowellsolar.com