Outdoor OTB install PLC Splitter 8 Core Fiber Optic Distribution FTTH Box
Description
The equipment is used as a termination point for the feeder cable to connect with drop cable in FTTx communication network system. The fiber splicing, splitting, distribution can be done in this box, and meanwhile it provides solid protection and management for the FTTx network building.
Feature & Benfits
- Total enclosed structure.
- Material: PC+ABS,wet-proof,water-proof,dust-proof,anti-aging, protection level up to IP65.
- Clamping for feeder cable and drop cable, fiber splicing, fixation, storage, distribution...etc all in one.
- Cable,pigtails,patch cords are running through own path without disturbing each other, cassette type SC adaptor installation, easy maintenance.
- Distribution panel can be flipped up, feeder cable can be placed in a cup-joint way, easy for maintenance and installation.
- Cabinet can be installed by the way of wall-mounted or poled-mounted, suitable for both indoor and outdoor uses.
Parameter
Model | Description | Size(Pic 1) | Max Capacity | ||
 |  | A*B*C(mm) | SC | LC | PLC |
FTKS-1805-08F | Splitter Box | 223*180*48 | 8 | 16 | 16(LC) |
Product photos




Exhibitions

Contact

Â
Outdoor OTB install PLC Splitter 8 Core Fiber Optic Distribution FTTH Box
Description
The equipment is used as a termination point for the feeder cable to connect with drop cable in FTTx communication network system. The fiber splicing, splitting, distribution can be done in this box, and meanwhile it provides solid protection and management for the FTTx network building.
Feature & Benfits
- Total enclosed structure.
- Material: PC+ABS,wet-proof,water-proof,dust-proof,anti-aging, protection level up to IP65.
- Clamping for feeder cable and drop cable, fiber splicing, fixation, storage, distribution...etc all in one.
- Cable,pigtails,patch cords are running through own path without disturbing each other, cassette type SC adaptor installation, easy maintenance.
- Distribution panel can be flipped up, feeder cable can be placed in a cup-joint way, easy for maintenance and installation.
- Cabinet can be installed by the way of wall-mounted or poled-mounted, suitable for both indoor and outdoor uses.
Parameter
Model | Description | Size(Pic 1) | Max Capacity | ||
 |  | A*B*C(mm) | SC | LC | PLC |
FTKS-1805-08F | Splitter Box | 223*180*48 | 8 | 16 | 16(LC) |
Product photos




Exhibitions

Contact

Â
Custom Wire Harness Assembly
- Electrified dimensional build boards with 100% continuity test
- Capabilities to test for fuse,diode,resistor, and relay presence
- Mating test fixtures for lower production wire harnesses
- Ability to free hand build harnesses for prototypes and design validation
- Separate layout boards for addition of fir tree clips, rosebuds, clamps,and labels after coverings added
- Capabilities to add board interlocks and test markings to harness as needed
Custom Wiring Harness,Wiring Harness,Cable Assemblies,Wire Harness,Wire Harness Assembly Manufacturer
ETOP WIREHARNESS LIMITED , https://www.etopwireharness.com