Rg58 Rg59 RG6 Coaxial Cable Stripper Stripping Tool (T5019)

Rg58 Rg59 RG6 Coaxial Cable Stripper Stripping Tool (T5019)

Description:
The coaxial cable stripping tool T5019 is a multi-functional coaxial cable stripper for RG-58(3C2V), RG-59/62, RG6 cables. No replacement cassette is needed.
 
Instructions:
Stripping Length: This stripper can strip cable in four lengths 4, 6, 8 and 12mm. The stripping length is preset to 6mm. If you want to strip other lengths, you may adjust the blade's position.
Blade's Depth: You may use the hex wrench, which is installed on the bottom of the tool to adjust the blade's depth. Insert the hex wrench into the blade depth adjuster on the bottom of the stripper, then rotate the hex wrench clockwise (to cut smaller cable) or counterclockwise (to cut larger cable). Repeat above steps to set the other blade.
Stripping Cable:
1.       The V-block is reversible. Use hex wrench to push the V-block out of the housing, align the character on the V-block with the arrow, then insert the V-block into its housing. The indicated arrow recommended the RG cable size mark in front of the V-block. 6=RG6 (5C2V), 8=RG58 (3C2V), 9=RG59/62 D=RG174
2.       Press the knurled portion on the upper jaw to open the stripper's jaws.
3.       Insert the cable you want to strip through the V-block until the cable reaches the V-shaped cable guide. Then release the upper jaw to close the jaws.
4.       Insert your index finger into the stripper's finger ring, turn the stripper clockwise 1-4 times. The cable's insulation is cut while you turn the stripper.
5.       Open the jaws and remove the cable. Pull away the outer jacket and dielectric to expose the inner conductor.
  
Package Included:  
1 x Coax Cable Stripper
1 x Screw Driver

  Rg58 Rg59 RG6 Coaxial Cable Stripper Stripping Tool (T5019)

Description:
The coaxial cable stripping tool T5019 is a multi-functional coaxial cable stripper for RG-58(3C2V), RG-59/62, RG6 cables. No replacement cassette is needed.
 
Instructions:
Stripping Length: This stripper can strip cable in four lengths 4, 6, 8 and 12mm. The stripping length is preset to 6mm. If you want to strip other lengths, you may adjust the blade's position.
Blade's Depth: You may use the hex wrench, which is installed on the bottom of the tool to adjust the blade's depth. Insert the hex wrench into the blade depth adjuster on the bottom of the stripper, then rotate the hex wrench clockwise (to cut smaller cable) or counterclockwise (to cut larger cable). Repeat above steps to set the other blade.
Stripping Cable:
1.       The V-block is reversible. Use hex wrench to push the V-block out of the housing, align the character on the V-block with the arrow, then insert the V-block into its housing. The indicated arrow recommended the RG cable size mark in front of the V-block. 6=RG6 (5C2V), 8=RG58 (3C2V), 9=RG59/62 D=RG174
2.       Press the knurled portion on the upper jaw to open the stripper's jaws.
3.       Insert the cable you want to strip through the V-block until the cable reaches the V-shaped cable guide. Then release the upper jaw to close the jaws.
4.       Insert your index finger into the stripper's finger ring, turn the stripper clockwise 1-4 times. The cable's insulation is cut while you turn the stripper.
5.       Open the jaws and remove the cable. Pull away the outer jacket and dielectric to expose the inner conductor.
  
Package Included:  
1 x Coax Cable Stripper
1 x Screw Driver

 

High Voltage Epoxy Resin Insulator

Insulators can be divided into low-voltage insulators and high-voltage insulators according to different voltage levels. High voltage insulator refers to the insulator used for high voltage and ultra-high voltage overhead transmission lines and substations. In order to meet the needs of different voltage levels, different numbers of single (piece) insulators of the same type are usually used to form insulator strings or multiple insulation poles.

Epoxy resin material has a series of outstanding advantages in organic insulation materials, such as high cohesion, strong adhesion, good flexibility, excellent heat curing performance and stable chemical corrosion resistance. It can be made into various solid materials by vacuum casting through epoxy resin casting system, such as automatic epoxy pressure gel manufacturing process (APG process). The epoxy resin insulation parts made of the epoxy resin have high mechanical strength, strong arc resistance, high compactness, smooth surface, good cold resistance, good heat resistance, good electrical insulation and other advantages, and are widely used in the power industry, mainly playing a supporting and insulating role.

High Voltage Epoxy Resin Insulator,Post Insulator,Epoxy Resin Post Insulator,High Voltage Epoxy Resin Post Insulator

Henan New Electric Power Co.,Ltd. , https://www.newelectricpower.com