First, the monochromaticity is good and the colors are rich and colorful. The color saturation reaches 130% full color, making the light clearer and softer.
Second, long life and good earthquake resistance. LEDs are semiconductor components. Unlike incandescent lamps, there are no fragile movable parts such as glass and tungsten wires. The fault is extremely low and maintenance-free.
Third, the response time is short, only 60 nanoseconds, especially suitable for the light source of automotive lamps, for the driver to fight for valuable time to reduce accidents.
Fourth, high efficiency, low energy consumption. The LED light source can directly produce the red, amber and other colors required by the automobile lamp without filtering color, and has no loss, and the power utilization rate is as high as 80% or more.
5. Small size and light weight. With its characteristics, it can design thin, light and compact lamps of various styles to provide space for automotive design.
Sixth, green lighting source. The LED spectrum has good monochromaticity, no extra infrared, ultraviolet and other spectra, no mercury harmful substances, and little heat and radiation.
7. The luminous flux of a single LED is small. At present, the research level of luminous flux of a single LED can reach 120lm/W, the product level is ≤60lm/W, and the high-power LED often needs to increase the size of the heat sink, so the LED light source generally adopts the LED array design method.
Eight, plane lighting, strong directionality. It is different from the point source incandescent lamp, the viewing angle is ≤180°, and the design must pay attention to and use the LED light source to have different viewing angles and not more than 180°.
Nine, the luminous efficiency of LEDs decreases with increasing temperature, and the general chip temperature will exceed 120 °C. Thermal design must be considered in the design of the luminaire assembly design and manufacturing process.
X. LEDs are multi-component compound semiconductor components. The characteristics of multi-component semiconductor devices are that their electrical, optical, thermal, and mechanical parameters are highly discrete. In design, we must fully consider this feature, and require component production companies to strictly classify and classify components according to the requirements of LED light sources for automobiles.
Second, long life and good earthquake resistance. LEDs are semiconductor components. Unlike incandescent lamps, there are no fragile movable parts such as glass and tungsten wires. The fault is extremely low and maintenance-free.
Third, the response time is short, only 60 nanoseconds, especially suitable for the light source of automotive lamps, for the driver to fight for valuable time to reduce accidents.
Fourth, high efficiency, low energy consumption. The LED light source can directly produce the red, amber and other colors required by the automobile lamp without filtering color, and has no loss, and the power utilization rate is as high as 80% or more.
5. Small size and light weight. With its characteristics, it can design thin, light and compact lamps of various styles to provide space for automotive design.
Sixth, green lighting source. The LED spectrum has good monochromaticity, no extra infrared, ultraviolet and other spectra, no mercury harmful substances, and little heat and radiation.
7. The luminous flux of a single LED is small. At present, the research level of luminous flux of a single LED can reach 120lm/W, the product level is ≤60lm/W, and the high-power LED often needs to increase the size of the heat sink, so the LED light source generally adopts the LED array design method.
Eight, plane lighting, strong directionality. It is different from the point source incandescent lamp, the viewing angle is ≤180°, and the design must pay attention to and use the LED light source to have different viewing angles and not more than 180°.
Nine, the luminous efficiency of LEDs decreases with increasing temperature, and the general chip temperature will exceed 120 °C. Thermal design must be considered in the design of the luminaire assembly design and manufacturing process.
X. LEDs are multi-component compound semiconductor components. The characteristics of multi-component semiconductor devices are that their electrical, optical, thermal, and mechanical parameters are highly discrete. In design, we must fully consider this feature, and require component production companies to strictly classify and classify components according to the requirements of LED light sources for automobiles.
Test Chamber,Climatic Test Chamber,Humidity Test Chamber,Temperature Humidity Test Chamber
Wuxi Juxingyao Trading Co., Ltd , https://www.juxingyao.com