New high-voltage three-phase high PWM frequency inverter reference design provides faster, more accurate drive control
Beijing, June 28, 2017— Texas Instruments (TI) has introduced an innovative three-phase gallium nitride (GaN) inverter reference design that helps engineers build 200 V, 2 kW AC servo motor drives and A generation of industrial robots with fast current loop control, higher efficiency, more precise speed and torque control. Download the reference design now.
The three-phase high-frequency GaN inverter reference design uses TI's latest LMG3410 600-V, 12-A GaN power module last year with integrated FET, gate driver and protection. The GaN module allows design switches to be five times faster than silicon FETs, achieves efficiencies above 98% at 100 kHz, and achieves efficiencies above 99% at 24 kHz pulse width modulation (PWM) frequencies. With GaN, designers can optimize switching performance, reduce motor power loss, and reduce heat sink size to save board space. When used with a low-inductance motor, running the inverter at 100kHz greatly improves torque ripple.
Power, speed and performanceThe GaN inverter power stage can be easily interfaced with a microcontroller (MCU), including TI's TMS320F28379D drive control system-on-chip to help dynamically adjust voltage frequencies and achieve ultra-fast current loop control. TI has also introduced the new DesignDRIVE fast current loop software with innovative sub-cycle PWM update technology to help improve the current loop performance in servo drives to less than 1 microsecond, which is three times the motor torque response. This fast current loop software is superior to traditional MCU-based current loop solutions and is free to use controlSUITETM software.
In addition to the GaN module, this reference design relies on TI's AMC1306 isolated delta-sigma modulator with current sensing to improve motor control performance. TI's ISO7831 digital isolator also provides enhanced isolation between the MCU and the six PWMs of the design.
Key benefits of TI's new three-phase inverter design· High efficiency power stage: 98% at 100kHz PWM and 99% at 24kHz PWM, reducing heat sink size
· High Pulse Width Modulation (PWM) frequency: High PWM switching frequency enables low inductance motors to be driven with very small current ripple
· Fast switching conversion: less than 25ns, no switching node voltage ringing, reducing electromagnetic interference
· 600V and 12A LMG3410 GaN FET power stages with more than 7 million device reliability hours: for fast and easy PCB layout and small form factor design.
Other design resources· Read the new white paper "High-Precision Motor Drive Control for Industrial Progress."
· Learn more about the LMG3410 module, "Optimizing GaN performance with integrated drivers."
· Get ​​more information about TI motor drives and smart grid infrastructure systems.
Cover of Cable Tray
Cable trays are an essential part of any electrical system that requires the management of cables and wires. They are used to protect and organize cables and wires, and to ensure that they are not damaged or exposed to any external factors that could cause harm. Cable trays are available in various types, sizes, and materials, and they come with different accessories and components that enhance their functionality. One of the essential components of a cable tray is the cover, which is used to protect the cables and wires from dust, debris, and other environmental factors.
A cover of a cable tray is a flat or curved panel that is used to protect the cables and wires that are placed inside the tray. It is made of various materials, including steel, aluminum, fiberglass, and plastic, and it is available in different sizes and shapes to fit different types of cable trays. The cover is attached to the tray using different methods, such as clips, bolts, or screws, and it can be easily removed for maintenance or repair purposes.
The main purpose of a cover of a cable tray is to protect the cables and wires from external factors that could cause damage or interfere with their performance. The cover prevents dust, debris, and other environmental factors from entering the tray and damaging the cables. It also protects the cables from accidental damage caused by people or equipment, and it prevents unauthorized access to the cables, which could lead to safety hazards or security breaches.
In addition to its protective function, a cover of a cable tray also enhances the aesthetic appeal of the electrical system. It gives the system a neat and organized appearance, and it conceals the cables and wires from view, which can be particularly useful in public areas or spaces where aesthetics are important.
There are different types of covers that can be used with cable trays, depending on the specific requirements of the electrical system. For example, solid covers are used to provide complete protection to the cables and wires, while perforated covers are used to allow air circulation and prevent the buildup of heat. Ventilated covers are used to provide a higher level of air circulation, which is particularly useful in areas where there is a risk of overheating or where the cables generate a lot of heat.
In conclusion, a cover of a cable tray is an essential component of any electrical system that requires the management of cables and wires. It provides protection to the cables and wires, enhances the aesthetic appeal of the system, and ensures that the system operates safely and efficiently. Cable tray covers are available in different types, sizes, and materials, and they can be customized to meet the specific requirements of the electrical system.
Cover Of Cable Tray,Aluminum-Alloy Cable Trays,Ladder Covers Of Cable Tray,Mesh Covers Of Cable Tray
Rayhot Technology Group Co.,Ltd , https://www.cnrayhot.com