[performance parameters]
Available in TSSOP14 lead package. Single supply operating voltage is 3V to 5.5V.
Features:
1. Two programmable current generators.
- Maximum ±3.2mA-8 bit 256 step resolution.
- Internal programmable full-scale current output.
- The external resistor pin can be set to the full-scale current output.
2. Integrated 8-bit A/D converter.
3. Internal voltage reference with output/input port.
4. Temperature compensation - internal or external sensors.
- Temperature range -40°C to +100°C
- Resolution 2.2 ° C / step ° C / step
-EEPROM lookup table
5, can be hot plugged.
6, 176-bit EEPROM-17 pages - 16 bytes per page.
7, write protection circuit.
-XICor block lock protection BLOCkLock?
-Logical control protection
- 2-wire bus with 3 slave address bits
Pin package diagram:
[Interchange compatible]
[Original (Chinese) data sheet manual foot function parameter package]
Residual Current Circuit Breaker With Over Load Protection
TWO FUNCTION : MCB AND RCCB FUNCTIONS
leakage breaker is suitable for the leakage protection of the line of AC 50/60Hz, rated voltage single phase 240V, rated current up to 63A. When there is human electricity shock or if the leakage current of the line exceeds the prescribed value, it will automatically cut off the power within 0.1s to protect human safety and prevent the accident due to the current leakage.
leakage breaker can protect against overload and short-circuit. It can be used to protect the line from being overloaded and short-circuited as wellas infrequent changeover of the line in normal situation. It complies with standard of IEC/EN61009-1 and GB16917.1.
RCBO,ELCB,Leakage Circuit Breaker,Residual Current Circuit Breaker,Residual Current Circuit Breaker with Over Load Protection 1p,Residual Current Circuit Breaker with Over Load Protection 2p
Wenzhou Korlen Electric Appliances Co., Ltd. , https://www.korlenelectric.com