The Allen & Heath GLDGLD firmware version has been upgraded again, with new features:
Support for GLD Editor software The new software application runs on a PC, MAC desktop, notebook or touch tablet and provides full configuration and control of the GLD Series consoles. Editor is available for GLD-80 and GLD-112 mixers. The Show created on one of the consoles can be run on another one. Simply reassign the channel strips to fit a different number of faders. It can also be used on GLD Remote and OneMix's GLD interface as well as on multiple iPads.
The Editor software configures the settings offline, and these settings can be connected directly or via a USB flash drive to the GLD console. For example: pre-set your show on a warehouse or tour bus.
The online Editor software can control the GLD console in real time by connecting the rear panel network interface. Users can establish a connection using a wired (LAN) or wireless (Wi-Fi) network. An additional wireless router (access point) is required for wireless operation.
The Editor Surface window simulates the physical control interface of GLD. Its status interface allows you to make offline editing settings or connect to a GLD console online.
The Editor Screen window simulates the touch screen interface of the GLD console, making it easy for users to control the processing, routing, scenes and settings.
Added gain trimming in the group (Ganging)
Channel gain trimming control is now included in the parameters that can be implemented in Gangd. For example, one hot input level can be adjusted simultaneously for two mono channels for a stereo keyboard, only one of which is assigned to the fader channel strip. Gain control cannot be grouped because the preamp is not part of the channel but can be assigned to any channel or mix.
Mixing output can be used as a channel source Any grouping, auxiliary, main output, or matrix output can now be used as the source for the input channel or as an external input to the mix. Because it usually does not use these outputs as a sound source, this feature works well for some special applications that require additional flexibility. For example: routing the main output L to a mono matrix, the main output R is used for separate control of the L&R mixing process.
Bug fix: The release of this version also fixes some other minor issues.
In electrical distribution, a fuse cutout or cut-out fuse is a combination of a fuse and a switch, used in primary overhead feeder lines and taps to protect distribution transformers from current surges and overloads. We make available these fuses in varied specifications to meet the clients' different preferences in an efficient manner. China Service Cut Out Fuse,Porcelain Polymer Fuse Cut Out manufacturer, choose the high quality Porcelain Electric Fuse Cut Out,Porcelain Cut Out Fuse, etc.
| MAIN DIMENSIONS AND STANDARD PARTICULARS | ||||
| Type | RLF-5 | RLF-5 | RLF-9 | RLF-9 |
| Rated Voltage,KV | 15-27 | 15-27 | 24-27 | 24-27 |
| Rated Current,A | 100 | 200 | 100 | 200 |
| Breaking Current,A | 10000 | 12000 | 8000 | 10000 |
| Impulse Voltage,KV | 125 | 125 | 150 | 150 |
| Power-Frequence withstand Voltage,KV | 45 | 45 | 65 | 65 |
| Creepage Distance,MM | 355 | 355 | 505 | 505 |
| Weight,KG | 8.8 | 8.8 | 12 | 12 |
| Dimension,CM | 51.5x34x12 | 51.5x34x12 | 48x34.5x14 | 48x34.5x14 |
We warmly welcome friends both domestic and abroad to visit our company, if you have any questions, please contact with us directly.
Porcelain Cut Out Fuse
Service Cut Out Fuse,Porcelain Polymer Fuse Cut Out,Porcelain Electric Fuse Cut Out,Porcelain Cut Out Fuse
FUZHOU SINGREE IMP.& EXP.CO.,LTD. , https://www.cninsulators.com