There are many DIY camera tripods, but there are not many practical and beautiful. The self-made tripod to be described below uses a diversion hose as the main material, which is very flexible and can be multi-angle shot, which is sturdy and beautiful and easy to carry. Seeing is believing, speed identification.
This article refers to the address: http://
DIY tripod tools and materials
Vise
Drill
4 guide hoses
4 conduit connectors
Standard tapered screw cone and threaded tube
Screws and nuts
Mahogany squares (as a base, similar materials can be considered from children's wooden toys.)
Tung oil and wax
DIY tripod production method
The first step: drilling holes in the mahogany square, the diameter of the hole is calculated according to the diameter of the bottom of the conduit connector. One on the front and three on the reverse. Make sure that the squares are thick enough that there is no conflict between the four holes, otherwise there will be cracks, and the load-bearing capacity and stability will decrease. After the drilling is completed, the three layers of tung oil on the wooden block, a layer of wax, play a waterproof and antiseptic effect.
Step 2: Install the screw cone and the threaded tube, and then fix the screw (matching the size and camera) to the front round hole. Then insert the connecting tube into the round hole.
Seal the connecting tube and screw with hot melt adhesive.
Step 3: Install the catheter with a vise. It should be noted here that if you just want to keep the camera fixed, it is OK to install 3 conduits under the base. If you want to change the angle, you need to make some adjustments to the above steps, that is, the screw is adjusted upwards.
This tripod is only suitable for lighter card machines.
If you go to SLR, the chances of turning over the boat are very high, so don't take risks.
The M8 cable is also called the M8 connector (with cable), because the connection wire above the sensor is most often used with the M8 connector (with cable), that is, the M8 connector - with cable series.
The basic performance of M8 connectors can be divided into three categories: mechanical properties, electrical properties and environmental properties.
M8 cable is mainly used in outdoor light box, electronic instrumentation, electronic machinery, communications, construction machinery, steel production equipment, power equipment, mining machinery, Sensors, solenoid valves, etc.
M8 male connection cable , M8 female connection cable,M8 3 pin connector cable,M8 4 pin connector cable,M8 male to female cable
Kunshan SVL Electric Co.,Ltd , https://www.svlelectric.com