Connected to "One of the home lighting design application guides"
kitchen
What to light & How to lightit
The kitchen is basically a work area for preparing food and washing dishes, but it is also often used for other activities: dining, doing homework, games, entertainment and reception. It should be functional, comfortable and aesthetic at the same time; therefore, lighting should provide a comprehensive solution of general lighting, work lighting and accent lighting, with control to suit different activities.
Visual focus
The kitchen is basically a place to prepare food and wash dishes, while at the same time it should also be comfortable and beautiful, and become the pride of the host.
In most cases, the visual focus is on the cabinet and its surrounding surfaces. The wood, tiles and metal used to make them should be well illuminated to reflect their appearance and function.
General lighting
In order to facilitate the viewing of cabinets and drawers, and to facilitate walking back and forth, general lighting is required. It is best to use fluorescent lamps in the most efficient way, with the lowest cost, but the most high-quality lighting.
In addition, the maintenance of fluorescent lamps is quite simple and can be integrated into the interior design without any difficulty. Their simple geometry allows them to be mounted on the ceiling, on the top or bottom of the cabinet, on the wall, and in an embedded installation.
Indirect lighting comes from fluorescent lamps mounted on the top of the cabinet, which are widely distributed and comfortable.
Although the built-in downlights are not as efficient as fluorescent lights, they have an advantage in flexibility because even if the shape of the room is irregular, it can be distributed throughout the kitchen to provide illumination.
Job lighting
Higher levels of illumination should be provided at the console, sink and stove. In order to provide illumination by the luminaire located in the center of the ceiling, the shadow caused by the person in operation or the cabinet above the operation surface will result in poor visual visibility during work.
The downlight should be used at the sink to make the concentrated beam directly from directly above the sink.
All Aluminum Conductor,Aac Wire,Aac Conductor,All Aluminum Wire
HENAN QIFAN ELECTRIC CO., LTD. , https://www.hnqifancable.com